I went to the album release party for Blair Packham, a top Canadian singer-songwriter who was the frontman for The Jitters a short while ago. He continues to write catchy, clever, and thoughtful songs and he also teaches songwriters at Song Studio in Toronto. I know Blair from his numerous appearances on Song Talk Radio (some of our best shows, thanks to Blair’s articulate insights into songwriting).
For this show at the Pilot, Blair performed songs from his new album Unpopular Pop with his band The Impossible Dream, and then took the stage with his old band The Jitters. I had a eureka moment when they played Last of the Red Hot Fools, as I recall that song being on the radio when I was a teenager, but I never lined up Blair (or the Jitters) with the song.
I’m glad I took my camera, as Blair really dug the photos (“Wow! Pictures of me that I don’t hate!”) I’ve been listening incessantly to the Jitters and Unpopular Pop since…
When you start creating mixes, you quickly realize that the low and low-mid frequencies are problematic. Without care and attention, they can sound muddy, boomy, and unclear. Mid- and high frequencies are much easier to manage—you can have multiple instruments and voices taking up the same sonic bandwidth and still hear everything clearly. Try this in the low frequencies and it’s a mess.
We feel low frequencies in our bodies. It’s where the punch, the groove, and the drive of a track lives. It’s critical to your mix that instruments in the low frequencies be clear, full, and bold.
As with many mixing decisions, it’s not about increasing the level or power of bass elements; rather, it’s about eliminating the stuff that gets in their way.
Enter the ubiquitous high-pass filter. The name is fairly self-explanatory; it filters out sound so that only high-frequencies pass through. The high-pass filter is sometimes called a low-cut filter. It’s easy to see how it works with a diagram. The horizontal represents frequencies, and the vertical represents amplitude, or volume.
In this example, the filter is set at 80 Hz, which means everything under 80Hz will be reduced in volume—just follow the slope of the line. For reference, 80 Hz is about the same as the low E string on a guitar. The low E string on a bass is one octave lower, about 40 Hz (that’s E2 and E1 on the piano).
For most instruments, including the human voice, there’s very little of value below 80 Hz. The bass guitar and thud of the kick drum usually live between 40 Hz and 250 Hz. So, the general wisdom is to high-pass everything except the bass and kick drum to 80 Hz or higher. The kick and bass will then have room to be heard clearly, which usually adds punch and groove to your mix.
Every single digital audio workstation (DAW, the software you use to record audio) has a high-pass filter. Usually, it’s a feature of your EQ (equalization) plug-in.
How high is your high pass?
The next question, then, is how high should you set your high-pass filters? That depends on your material. The rule of thumb is to dial up the filter during playback on a track until it starts sounding thin, then back down a bit. If you high-pass too much on guitars, pianos and vocals, you could rob the mix of warmth and body. If something sounds thin in solo, it could be just right in the mix; never judge your settings when listening to a track in solo—it only matters if the mix sounds good.
High-pass filters can also be used on bass and kick drum, but normally they are set very low. For dance music, you may want to include and emphasize the sub-bass (below 40 Hz). For most rock, pop, country and folk tracks, I recommend minimal high-pass filters on the bass and kick drum. Again, what matters is the kind of sound you’re after. Mix with purpose and you’ll get what to where you want to be much faster.
Microphones with high-pass filters
Some microphones have a switch for a high-pass filter. Usually it looks like this, where the crooked line indicates the “on” position for the filter. Usually they’re fixed at 80 Hz.
If you’re recording vocals or guitar (where there will be a bass in the arrangement), it’s advisable to use the high-pass filter on your microphone. Eliminating low frequencies you know you’re not going to need during the recording phase allows you to record a more consistent, louder signal.
Always mix with purpose
Finally, it’s easy to get carried away and high-pass everything judiciously. If you mix with purpose and subtlety, the overall effect can be dramatic. In other words, a subtle high-pass filter on 8 tracks, when they are all mixed together, can make a big difference.
I’ve personally found using high-pass filters to be the one technique that is universally effective on just about any mix, from a simple voice-over narration to a full band. Next to volume, it’s the move that makes the biggest difference to your mixes—in a good way.
If you’ve never mixed with using a high-pass filter, try it out on an old mix and see if it doesn’t clear out the muddiness and open up the sound. I’d love to hear your thoughts—leave a comment below.
As part of the indie rock band Beige Shelter, we were approached to write a new song for a youth gang prevention event. Although we declined to perform for the event, we realized our new song was also a great message for mental health awareness and conversation.
My friend and Beige Shelter frontman Adi Aman had written a song a few years ago with a message to help out a friend going through some tough times. Adi sent me a rough recording and his lyric/chord sheet to play around with. In particular, he said he wasn’t very happy with the melody. Before I even got a chance to look at it, he followed up with a revised lyric that was more poetic and a bit more abstract.
The rewriting process
At the time, we were still involved in the youth prevention event, and I took this angle when rewriting the song. I thought a more direct lyric would be more effective in reaching young people. I also wanted to highlight the aspect of reaching out for help and getting it from friends and family. This, to me, is at the cornerstone of good mental health—people need to be willing to come forward and talk to someone they trust, and their communities need to be willing to listen, empathize and help as best they can.
I printed out Adi’s lyrics and chords and sat at my piano to work on the song. Starting with small edits, I quickly found myself rewriting entire phrases. I realized that using Adi’s lyrics as springboards, I could develop a much more direct song, and marry a melody to the words more easily. This is the sort of lyric I never would have come up with on my own, but using Adi’s original take as inspiration gave me the direction and focus I needed. Here are the working pages I used:
I took care to develop a simple, flowing chord progression and catchy melodies. It was amazing how much mileage I could get from using C, G, F, and Am by playing around with the time between each chord change. I introduced a new, unheard chord to start the pre-chorus section. In other words, the Dm had not been heard in the song yet, but the rest of the pre-chorus chords were also used in the verse. This, along with the melodic centre change, was enough to give the listener a sign-post that the pre-chorus was a new section. For the chorus, I returned to the base C major chord but lifted the melody again.
Back and forth
I presented the revised song to Adi and he liked it very much. He had a few revisions for some of the chord changes, especially the unusual chords I used to end the chorus. Adi felt keeping it simple would be more effective, and once he sung it with his rich voice, I was compelled to agree.
Our bass player Tom made a suggestion for a lyric change at the end of the second verse:
Me: It goes “For your grief, but you know…” which is kinda cheap. We need a good word that rhymes with “grief.”
Adi (singing): For your grief, but believe…
Me: And that flows great into the pre-chorus lyric “You have got the strength to carry on…” — well done, Tom!
Feedback from other songwriters
I presented the song at a Songwriter’s Cafe Meetup by playing back the recording from our latest rehearsal. Members found the song to have an inspiring message without being didactic, and with a good flow to the chords and melody.
We adopted two points from the group to improve the song:
Revised the chorus lyric “And you think that there’s no way to see the light” to “And you think there’s no way out of your plight” so that the word “light” isn’t featured twice in the chorus.
Extended the ending to repeat the main hook “We’ll be lighting your way” a few times before finishing the song.
Recording and Producing
We wanted to release Light Your Way as a single during the CMHA (Canadian Mental Health Association) Mental Health Week between May 1 and May 7. I knew this would be a tight schedule to get it arranged, recorded, mixed, and released.
During our first recording session, we were still finessing lyrics and making small changes to the chords. I used a rehearsal recording to set the tempo for a drum loop. I recorded Adi playing his acoustic guitar and then recorded his vocals.
Tom recorded a bassline at his home studio and sent it to me. Meanwhile, I developed a drum track and added some piano comping. Our lead guitarist, Karan, was busy with final exams and couldn’t commit to the recording session. I asked singer-songwriter and guitarist Paul Vos to contribute lead guitar based on some noodling I had done on my keyboard. Paul did an awesome job with the last minute crunch and played the part with great finesse.
During the mixing stage, I decided the piano track wasn’t helping and re-recorded an electric piano track with a little more interest than simple comping. I still wanted the acoustic guitar to be the main rhythm instrument—the electric piano was just there to add some weight to the track. I also added a string pad and a tambourine to thicken up the choruses. Finally, I recorded some vocal doubles with Adi for the choruses, again, to give them a little more thickness.
We wanted something unique for the cover art. Adi happened to see a canvas watercolour painting of tulips that my wife Hema had done a few years ago. He liked it enough to ask her if we could use it for the cover art. She gave us her blessing, and I took a photo of it to develop the cover. We kept it very simple, with the Beige Shelter logo and the title. A big thanks to Hema for her beautiful contribution!
Here’s the final track, which is available on Spotify, iTunes, Apple Music, Google Music and other digital retailers. It was a great joy and privilege to write and produce this song with Adi, Tom, and Paul. Enjoy!